Issues resolved in Firmware Version 1.17.1 :

- Issue 1352: Multiple OCUR could have same IP address

In multiple-OCUR configurations using closely related MAC addresses, the DHCP service of the device will generate identical IP addresses. The result is that only one of the multiple devices is available for the viewer.

- Issue 1293: Cached SI table still used when provider changes channel lineup

After a cable headend modifies its channel lineup, there is a potential transition error case for the device to use a partially out-of-date channel map. This might prevent temporarily the viewer from watching certain channels.

- Issue 1195: No TV signal when tuning twice on the same channel

Attempting to record a program on the currently-tuned channel causes a No TV Signal and loss of recording on some network configurations. This problem is limited to CableCARDs other than the Motorola S-Card.

- Issue 915: LED shows green with no USB cable attached at power up

When an OCUR device is brought up without a USB network connection, the OCUR Network LED displays incorrect status. The OCUR device has two front panel LEDs, representing Network and Power states. The Network LED should be red at initial power-up and then green only once the device has connectivity.

About TV Tuner Firmware:

Firmware updates for TV tuners are very important when it comes to keeping your device running at maximum efficiency. These updates contain a multitude of bug fixes, resolve compatibility issues and can even add new and exciting features to your device.

TV tuner firmware updates generally contain bug fixes, the most common of which are synchronization issues between the audio and video signal, and compatibility for countries that use different encoding formats such as PAL, NTSC and SECAM.

These updates usually come in the form of an installer which checks the currently installed firmware and applies the update in case your version is out-of-date. Although this process only takes a few minutes, you should keep in mind that disconnecting the tuner from the PC could result in an incomplete update that may cause your device to malfunction.

If you are confident that this is the appropriate firmware for your device and operating system, hit the download button, follow the installation instructions and enjoy your newly updated TV Tuner.

For more downloads, check out our website which is constantly updated with the latest in software and drivers.

It is highly recommended to always use the most recent driver version available

Do not forget to check with our site as often as possible in order to stay updated on the latest drivers, software and games

Try to set a system restore point before installing a device driver

This will help if you installed a wrong driver

Problems can arise when your hardware device is too old or not supported any longer