Fixes:

- Under certain circumstances, the MixRack and ... 2. Remove any previous dLive firmware from your USB drive. To do this, look into the USB AllenHeath-dLive folder and delete the existing Firmware folder ... .zip file to the root directory of your USB drive. Do not change the folder name or ... invalidate your firmware.
4. Safely remove the USB drive from your computer.
5. Connect the ... the MixRack gigaACE/Network ports.
6. Plug the USB drive into the dLive USB port, and touch Update in the Firmware page. ... and if valid firmware is found on the USB drive then details of the current versions and versions found on the drive will be displayed.
7. Touch the Update button. Do not interrupt this process. Failure to complete the transfer may result in firmware corruption. Make sure the mains power and connecting cables are reliable and that the system will not be disturbed or switched off during the update.
8. When the firmware has been successfully installed, the system will automatically reboot.
9. Once the system is fully booted, recall a Template Show or User Show to restore your settings.

To update the firmware with no Surface connected:

1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your hard drive. To do this, look for a AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to a directory on your hard drive. Do not change the folder name or browse inside the ...