Known issues:

- When updating firmware in a multi-surface system, firmware should be updated on one Surface at a ... from the MixRack via the Connection Failed / Firmware screen on boot up.
- When using a 3rd party touchscreen with Director, drag and drop in the Cue ... complete on release and will require a subsequent touch of the screen.
- Mix highlighting can sometimes ... SQ connected to gigaACE card.

To update the firmware with a Surface connected:

1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your USB drive. To do this, look ... the USB AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other files or folders.
Firmware folder as doing this may cause firmware corruption. Attempting to navigate or open files within ... small temporary system files which can invalidate your firmware.
4. Safely remove the USB drive from ... USB drive into the dLive USB port, and touch Update in the Firmware page. The dLive will reboot to a ‘bootloader’ screen and if valid firmware is found on the USB drive then details ... on the drive will be displayed.
7. Touch the Update button. Do not interrupt this process. Failure to complete the transfer may result in firmware corruption. Make sure the mains power and connecting ... off during the update.
8. When the firmware has been successfully installed, the system will automatically ... Show to restore your settings.

To update the firmware with no Surface connected:

1. Download the latest ...