Fixes:

- Under certain circumstances, the MixRack and ... boot up.
- When using a 3rd party touchscreen with Director, drag and drop in the Cue ... complete on release and will require a subsequent touch of the screen.
- Mix highlighting can sometimes ... USB drive into the dLive USB port, and touch Update in the Firmware page. The dLive will ... on the drive will be displayed.
7. Touch the Update button. Do not interrupt this process. Failure to complete the transfer may result in firmware corruption. Make sure the mains power and connecting cables are reliable and that the system will not be disturbed or switched off during the update.
8. When the firmware has been successfully installed, the system will automatically reboot.
9. Once the system is fully booted, recall a Template Show or User Show to restore your settings.

To update the firmware with no Surface connected:

1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your hard drive. To do this, look for a AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to a directory on your hard drive. Do not change the folder name or browse inside the Firmware folder as doing this may cause firmware corruption. Attempting to navigate or open files within this directory may cause your Operating System to leave behind small temporary system files which can invalidate your firmware.
4. Open a web browser and type the IP address of the MixRack into the address bar (Default: 192.168.1.70)
5. Select Choose File
6. Select the location where you extracted the firmware ...