How to Check your RTR-500NW/AW Firmware Version:

See below for how to check your firmware version depending on your interface method.

T&D ... the lower left on the screen.

Firmware Update Procedure - When Using T&D WebStorage Service 

- ... recorded data will be deleted by updating the firmware. Please make sure to download all necessary data before update.

- In the case of when XXX does not represent the latest firmware version, it means the update has failed. In the case of an update failure, please use the update tool as shown in the procedure below.

When using ... Service, you do not need to download the update tool. By following the TR-7nw reset procedure shown below, the new firmware will be installed automatically.

Reset Procedure for Automatic Firmware Update

- When the recording is in progress (REC ... resetting the TR-7nw, the installation of the new firmware will be completed in about 5 seconds. When the firmware is updated successfully, [LXXX] will appear on the LCD screen. (The XXX represents the version number of the firmware.)

Firmware Update Procedure - When NOT using T&D WebStorage Service

The XXX represents the version number of the firmware. Please read using the number of the appropriate ... to the computer.

- Open the downloaded "TR-7nw Firmware Update Tool".

- Follow the instructions on the screen to update the firmware.

- If the firmware is updated successfully, [LXXX] will appear on the TR-7nw LCD screen when the power is turned on. The firmware update should take only a few minutes to complete.

Usually, device functionality is ensured by its drivers, firmware, and/or BIOS packages, and the product can be ...