3. Right click on the hardware device you wish to update and choose Update Driver Software

4. Choose to select the location of the new driver manually and browse to the folder where you extracted the driver

5. If you already have the driver installed and want to update to a newer version got to "Let me pick from a list of device drivers on my computer"

6. Click "Have Disk"

7. Browse to the folder where you extracted the driver and click Ok

About SATA / AHCI / RAID Driver:

When you install an operating system, SATA settings (be it AHCI, RAID, or IDE mode) are detected from the BIOS. If you want to change from one mode to another after the OS has been applied, appropriate drivers are required.

Bear in mind that if you modify these settings without installing proper files first, the operating system will not be able to boot until changes are reverted or required drivers are applied.

To perform the latter task, get the package, run the available setup and follow the instructions displayed on-screen for a complete installation. Afterwards, perform a system reboot so that all changes take effect, enter BIOS menu, and set the SATA option to the mode that best describes the newly applied drivers.

So, if you intend to modify the SATA settings to the mode described by this release, click the download button, and make the desired changes. In addition to that, don’t forget to constantly check with our website so that you don’t miss a single new release. 

It is highly recommended to always use the most recent driver version available

Do not forget to check ...