This software updates the LinkStation firmware to version 1.81. If your firmware is ... do not need this update.

Note: If your LinkStation is in EM mode, this firmware update might ... to Check Your Firmware Version:

Select your LinkStation from the NAS Navigator2 window. The firmware version ... the name is in the form LS-***-EM***, the LinkStation is in EM (emergency) mode.

Version History

1. Connect the LinkStation properly and configure the LinkStation and a computer to run the updater on ... the IP address and subnet mask of the LinkStation are

" 192.168.1.150 , 255.255.255.0 "

then the ... _not_ work properly.

In this case, reconfigure the LinkStation's IP address and subnet mask to

" 192.168.0.150 ... the downloaded file and run "LSUpdater.exe". When a LinkStation is detected, an update window will open.

4. Select the LinkStation to update if multiple LinkStation are connected.

5. Click "Update" and enter the LinkStation's admin password.

6. Click "OK".

7. Transferring and updating the firmware will start. Wait until it finishes. The info LED will blink during the update.

8. When the update is complete, a message will be displayed.

About NAS Firmware:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system’s overall performance, stability, and security by adding various fixes for related issues, enhancing existing features (or adding support for new ones), or updating different applications.

Due to the high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it appears – and not too safe ...