Improvements:

- Shure Integration: Support for the latest revision of ULX-D hardware.
- SoftKeys assigned to the Mute function with Invert mode enabled will now illuminate green.
- Shows created in 1.71 or earlier will require the SoftKey Mute Invert function to be re-applied to enable the new functionality.
- Press F11 to show mouse cursor.

Fixes:

- Under certain circumstances, the MixRack and Surface unit names could display as “Unknown” during a firmware update.
- Relative Scene Update could take a long time when updating a large number of scenes.
- The FX Library panel could flicker under certain circumstances.
- Scene Safes page could fail to show all active safes under specific conditions.

Known issues:

- When updating firmware in a multi-surface system, firmware should be updated on one Surface at a time with the Surface connected to the main gigaACE socket and all other Surfaces disconnected from the MixRack. Alternatively the Surfaces can be updated whilst disconnected from the MixRack via the Connection Failed / Firmware screen on boot up.
- When using a 3rd party touchscreen with Director, drag and drop in the Cue list or Scene Import list will sometimes not complete on release and will require a subsequent touch of the screen.
- Mix highlighting can sometimes stop working in Director after adjusting the strip layout.
- Socket preamp displayed when SQ connected to gigaACE card.

To update the firmware with a Surface connected:

1. Download the latest firmware and save the .zip file.
2. Remove any previous dLive firmware from your USB drive. To do this, look into the USB AllenHeath-dLive folder and delete the existing Firmware folder and also the Firmware.md5 file. Do not delete other files or folders.
3. Extract the .zip file to the root directory of your USB drive. Do not ...