4. Click Next.

5. Select the Yes option, and then click Next. The wizard updates the firmware.

NOTE: This may take several minutes.

6. Press Next.

7. Click Finish.

The Unifi Projector Update wizard closes.

8. Reset the 600i interactive whiteboard system by unplugging the Unifi 35 projector.

9. Press and hold the Power/Standby button.

10. Plug in the Unifi 35 projector and continue holding the Power/Standby button until the status light flashes amber.

You’ve updated the firmware to the latest version.

About Projector Firmware:

Install this firmware package and projectors can benefit from higher image quality, improved performance and stability, various fixed issues encountered throughout the unit’s lifetime, as well as several other changes.

Still, if you wish to apply this release, it would be best if you first read and understand the installations procedure; also, perform this task using a fully-charged battery or in a steady power environment (such as the one ensured by a UPS unit), and only after you have familiarized yourself with the update steps.

Bear in mind that, while the firmware is upgrading, it isn’t recommended to use the projector’s buttons, or interrupt the process in any way; doing so can cause serious malfunctions to the device and might even render it unusable.

That being said, if you intend to update to this release, click the download button, get the package and update the firmware version. If not, check back with our website as often as possible so that you don’t miss the update that will boost the performance of your projector.

It is highly recommended to always use the most recent driver version available

Do not forget ...