- Check the WT-7 firmware version.

- Turn the camera and WT-7 off.

Basic Upgrade instructions:

- Create a folder on the computer hard disk and name it as desired.

- Save the downloadable file to the newly-created folder.

- Run the package to extract the following file to a folder named “WT7Update” that contains a .bin package (the wireless transmitter firmware)

- Using a card slot or card reader, copy the firmware to a memory card that has been formatted in the camera.

- Insert the memory card in the camera. If the camera allows you to select one slot as the primary slot and the other as the secondary slot, insert the card into the slot currently selected as the primary slot. Otherwise insert the card into Slot 1.

- Connect the camera and WT-7 using a USB cable and turn both devices on.

- Press the camera MENU button and select Network >Options >Firmware version >Update in the SETUP MENU, and follow the on-screen instructions to perform the firmware update.

- Once the update is complete, turn off the camera and WT-7 and remove the memory card.

- Turn on the camera and WT-7 and confirm that the firmware has been updated to the new version.

About Camera Adapter Updates:

Updating to a different firmware version than the one already installed on the adapter can bring various changes such as improved performance and stability, add new features or enhance existing ones, but also various fixes for more or less recurrent issues.

Given the large variety of camera adapters and numerous methods for upgrading the device, it is highly recommended that you read and, above all, understand the installation steps before you consider ...