- D5

- D4

- D4S

- Df

- D810

- D810A

- D800

- The D5, D4, D4S, Df, D3X, and D3S

- The D3 (camera A/B firmware version 2.00 or later)

- The D810, D810A, D800, D800E, D750, D700, D610, D600, D500, and D300S

- The D300 (camera A/B firmware version 1.10 or later)

- The D7200, D7100, D7000, D5600, D5500, D5300, D5200, D5100, D5000, D3400, D3300, D3200, D3100, D3000, and D90

- The COOLPIX A

Important Note:

- Other cameras cannot be used.

- If the camera firmware requires updating, make sure to update the camera firmware before updating the firmware for the SB-500.

Viewing the Flash Unit Firmware Version

- Attach the SB-500 to the camera and turn both the camera and flash unit on.

- Press the camera MENU button and select Firmware version in the SETUP MENU to display the SB-500 firmware version.

- Check the SB-500 firmware version.

- Turn the camera and flash unit off.

Updating the Flash Unit Firmware

- Create a folder on the computer hard disk and name it as desired.

- Download the package to the created folder.

- Run the saved package to extract the following file to a folder named “SB500Update”:

- Using a card slot or card reader, copy the .bin file to a memory card that has been formatted in the camera.

- Insert the memory card in the camera. If the camera allows you to select one slot as the primary slot and the other as the secondary slot, insert the card into the slot currently selected as the primary slot. Otherwise insert the card into Slot 1.

- Attach the SB-500 to the camera and turn on the camera ...