Caution:

... if you experience any problems caused by this firmware update.
- Do not turn the unit ... USB drives are not mounted automatically after a firmware update. To mount them, unplug and then reconnect ... >/

How to Use the Updater:

1. Connect the LinkStation properly and configure the LinkStation and a computer to run the updater on the same network subnet. The subnet masks should be the same ... the IP address and subnet mask of the LinkStation are
" 192.168.1.150 , 255.255.255.0 "
In this case, reconfigure the LinkStation's IP address and subnet mask to
... the downloaded file and run ""LSUpdater.exe". When a LinkStation is detected, an update window will open.
4. Select the LinkStation to update if multiple LinkStation are connected.
5. Click "Update" and enter the LinkStation's admin password.
6. Click "OK".
7. Transferring and updating the firmware will start. Wait until it finishes. The info ... the update finishes, a message will be displayed.

About Network-Attached Storage Updates:

Upgrading the Network-Attached Storage (NAS) firmware can improve the system's overall performance, stability, and ... high number of NAS manufacturers, as well as network storage types, installing a new firmware might not be always as easy as it ... software update can cause serious malfunctions to the network storage.

So, before you even consider ... guide, click the download button to apply this firmware version to your NAS. Remember to check back ...