Improvements:

- Adds support for Radio Controlled Lighting System

- Improves stability in picture shooting mode (optimizing temperature control, effect is different according to temperature)

- Adds support to output video via HDMI (still mode) when using the Remote Camera Control software

- Improves overall stability and operability of the camera

Notes:

- When an SDHC memory card is used to record movies in XAVC S format over extended periods of time, the recorded movies will be divided into files of 4 GB, and the divided files can then be integrated into a single file using the PlayMemories Home software

- Shooting movies in XAVC S format requires SD Speed Class 10, UHS Speed Class U1, or faster

- When recording at 100 Mbps or more, UHS Speed Class U3 is required

Download and Update the Firmware:

- IMPORTANT: Do not allow the computer to enter Sleep (Standby) mode during the update process.

- Download the firmware file to a temporary or download directory.

- Go to the directory where the file was downloaded and double-click the downloaded file to begin the Firmware Updater.

- Connect the camera to your computer using the supplied USB cable.

- The LCD screen on the camera will turn off when it is connected to the computer. If the LCD screen of camera does not turn off, disconnect and reconnect the USB cable to the camera. If the computer has additional USB ports, try connecting the USB cable to different USB port.

- Verify that the Remove Hardware icon or is displayed in the task tray at the lower right-hand corner of the computer screen.

- At the Firmware Updater screen, click Next.

- Do not power off the camera or disconnect the USB cable until the update process is ...