UPGRADE FIRMWARE

Below is a procedure for loading the firmware into FLASH memory. The firmware update file transfer process should take about 30 minutes ... OFF THE INSTRUMENT AT ANY TIME DURING THIS UPDATE If the instrument is turned off while burning ... on clean and stable power before performing this update.

1. Close all instrument windows.

2. From the iPort menu, select Instrument > Update Firmware. Select TCP/IP or Serial, depending on the connection.

3. In the Update Instrument Firmware Program dialog box, enter the instrument ID (if ... In the Open File dialog box, select the firmware update file, then click the Open button.

5. File ... that are displayed, this is normal after a firmware update. At this time, the bootloader and application code in each of the low-level processors will be updated to the latest version.

7. To verify all updates were successful, go to the ALARMS menu and ... show “FAIL”, contact technical service.

About Device Firmware:

Applying a newer firmware version than the one already installed on your ... developed features.

On the other hand, downgrading the firmware version can recover the device’s functionality in the event of a software update either turning up faulty or causing the unit’s ... However, bear in mind that applying an older firmware isn’t recommended and might not always be possible.

When it comes to the update steps, due to the large variety of devices and numerous ways for installing a new firmware, it is recommended that you carefully read and ... the upgrade steps, and consider applying a different firmware only when you have familiarized yourself with the update method.

As the installation process is most of ... that have the ability to successfully complete the update; regular users may initiate it at their own ... take into account all the aforementioned aspects, and update the device’s firmware. Also make sure you constantly ...